WiFi traffic generator

The WiFi traffic generator application for the moreph30 is capable of simultaneously generating a multitude of b/g/n WiFi signals. The signals may be placed on arbitrary channels and may overlap on the same channel. The signals are parameterised in terms of their transmission time, power, modulation/coding scheme and duration. The packets generated contain the correct synchronisation/training sequences, but the data contained within them is random. Both DSSS and OFDM phys are supported. STBC and beamforming are not supported. Data defining the scenario to be generated is downloaded to the moreph30 in the form of a csv file. The file can either be generated using the Amber GUI or a spreadsheet application. The unit can either be operated from a controlling host or run standalone with the scenario definition being read from a USB memory stick.

 

Bluetooth® 5.3 traffic generator

The Bluetooth® 5.3 traffic generator application for the moreph30 is capable of simultaneously generating a multitude of BR/EDR/LE signals. The signals may be placed on arbitrary channels and may overlap on the same channel. Each signal is fully parameterised in terms of its transmission time, channel, power, contents, and RF distortions. Data defining the scenario to be generated is downloaded to the moreph30 in the form of a csv file. The file can either be generated using the GUI or a spreadsheet application. The application includes automatic preamble, sync word, CRC and whitening generation to aid packet definition. The moreph30 can either be operated from a controlling host or run standalone with the scenario definition being read from a USB memory stick.

 

Bluetooth® 5.3 LE RF tester (Development and Production)

The Bluetooth® LE RF tester application for the moreph30 can perform all the tests set out in the Bluetooth® Radio Frequency Physical Layer test specification without the need for external test equipment, with some minor limitations. Where no physical connection to the device under test is possible, the application can utilise advertise and scan packets to provoke a response from the device and perform both transmitter and receiver testing. The application can also analyse packets on a live link as well as acting as a signal generator capable of producing both wanted and interfering signals simultaneously.

• Support for all BT 5.3 RF-PHY test cases.
• Extensive coverage with no additional test equipment.
• C/I, blocking & intermodulation signals generated internally.
• Accurate power control to -115dBm for coded PHY tests.
• Full support for in-band emissions
• Full support for Bluetooth® 5 low energy features.
• 2Mbps speeds.
• Coded PHYs.
• AoA/ AoD.
• Fast.
• In-band emissions test completes in 2.5ms.
• 2s boot time.
• Advertise and listen on multiple channels simultaneously.
• Simple control via comprehensive GUI or Python/C dll.

 

 

Bluetooth® BR/EDR RF tester (Development and Production)

The Bluetooth® BR/EDR RF tester application for the moreph30 Can perform all the tests set out in the Bluetooth® Radio Frequency Physical Layer test specification without the need for external test equipment, with the exception of out-of-band blocking. Moreph30 can act as a signalling tester, with full control of the device under test (DUT) over-the-air. It can also be used in a non-signalling mode, analysing packets transmitted by the DUT, as well as generating both wanted and interfering signals simultaneously for reception by the DUT.

• Support for all BT 5 RF-PHY test cases.
• Extensive coverage with no additional test equipment.
• C/I and intermodulation signals generated internally.
• Accurate power control to -115dBm.
• Full support for spectral tests.
• Fast.
• 2s boot time.
• Rapid connection to device under test.
• Inquiry and page packets transmitted on multiple channels simultaneously.
• Receiver listens on all channels simultaneously.
• Dedicated parallel processing.
• Simple control via comprehensive GUI or Python/C dll.

 

Bluetooth® LE AoA/AoD extension for LE RF Tester. 802.15.4 RF tester.

 

Bluetooth® LE Advertise and scan simulator.

The Bluetooth® advertiser simulator and monitor for the moreph30. The application can listen on all primary and secondary advertising channels simultaneously. This greatly reduces test time when the morephe30 has been configured as a scanner.

• Act as a Bluetooth® advertiser capable of generating extended advertising and periodic advertising events.
• Act as a Bluetooth® scanner capable of requesting advertising data from legacy or extended advertising packets.
• Act as a Bluetooth® sniffer capable of decoding legacy advertising, extended advertising and periodic advertising events and associated scan requests.
• Generate statistics on the number of scannable packets, the number of scan requests and the number of successfully elicited scan responses.

 

QBHSL® RF tester

The Qualcomm® Bluetooth® High Speed Link (QBHSL) tester application for the moreph30 can perform all the tests set out in the Bluetooth Radio Frequency Physical Layer test specification without the need for external test equipment, with some minor limitations. Where no physical connection to the device under test is possible, the application can utilise advertise and scan packets to provoke a response from the device and perform both transmitter and receiver testing. The application can also analyse packets on a live link as well as acting as a signal generator capable of producing both wanted and interfering signals simultaneously.