Etherstore is an RF record/playback option for the moreph30. The RF environment application is capable of recording and playing back the entire 2.4GHz ISM band. The recorded data is stored within the moreph30 hardware and has a maximum duration of 2 hours. The unit may be operated either standalone or attached to a controlling host platform. The connection to the host may be via USB or Ethernet. Record/playback data may be uploaded/downloaded from the host. The unit can be operated from a 12V supply and incorporates automotive quality supply protection. Exactly what you need for RF site surveys, spectrum planning, interoperability, and receiver testing.
Key features.
- 2-hour record time.
- Multiple storage options – SSID or host
- Simultaneous reception/transmission over the entire 2.4GHz ISM band.
- Fully programmable signal analyser and generator.
- Diverse application support with open APIs.
- Ultra-linear receiver and transmitter.
- Built-in 6GHz CW source.
- Simultaneous monitoring of all 13 WiFi channels.
- Test and measurement options all via applications.
- Upgradable to a Protocol Analyser via blueSPY.
- Small footprint 159mm x 150mm x 47mm
Applications.
The RF environment analyser application for the morephE can analyse captured files to:
- Generate a score indicating how challenging the environment is for Bluetooth devices to operate in.
- Generate a clear channel assessment for Bluetooth devices.
- Generate a clear channel assessment for WiFi devices.
FAQ
How do I upgrade my moreph30 to Etherstore?
This is simple, it will need to be returned to us for a hardware update and then you download the Etherstore RF environment application.
Can I also download previously captured files to the morephE?
Files can be downloaded from the host to the Etherstore. These may either be files previously recorded by the Etherstore, or scenarios which a user has generated.
Is connection to a host required for morephE to function?
No, the morephE can operate in autonomous mode. The RF environment application plus the control script can run from a USB drive. When the unit powers up, the application will launch and read in the control script. The script may direct the application to either playback an existing file or start a new recording.
What are the file formats supported by the morephE?
There are 2 output file formats supported for recordings, “Volts” and “Raw”.”Volts” returns the file stored in 32-bit floating point format, with the correction filter applied and scaled to volts across 50Ω at the input to the Etherstore. “Raw” returns the raw 12-bit signed ADC samples.